Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide

(3) Input the following items:

--"Search Mode"

With "Network Address Search" selected, the NEC ESMPRO Manager searches for the managed

components using the specified network address.

With "IP Address Range Search" selected, the NEC ESMPRO Manager searches for the managed

components using the IP address range.

--"Network Address Search"

When you select "Network Address Search" for "Search Mode", specify the network address and

network mask of the managed component to be searched for.

--"IP Address Range Search"

When you select "IP Address Range Search" for "Search Mode", specify the start IP address and end

IP address of the range in which managed components are to be searched for.

"Common"

--"Registration Group"

Specify the group to which the managed component will belong.

"System management"

--"Search"

Select "Enable" to manage the system of the component.

"RAID system management"

--"Search"

Select "Enable" to manage the RAID system of the component.

"NEC ExpressUpdate"

--"Search"

Select "Enable" to manage the component using NEC ExpressUpdate.

"Management controller management"

--"Search"

Select "Enable" to manage the "Management controller" of the component.

--"Features NEC ExpressUpdate"

Select "Enable" to feature NEC ExpressUpdate.

--"Authentication Key"

Enter the "authentication key" that you set in the "BMC configuration information" of the managed

component.