Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
55
(2) If "Status" column of the table has "Completed", the network-boot procedure of the destination
component has completed.
See the list below for "Status".
Status Meaning
Not Processed NEC ESMPRO Manager PXE Service does not execute the network-boot
procedure yet.
Completed NEC ESMPRO Manager PXE Service finished the network-boot procedure.
(NEC ESMPRO Manager PXE Service will not set BMC configuration for
this computer even if network-boot is requested again.
See2.2.2.5 "Procedure to retry configuration with NEC ESMPRO Manager
PX
E Service" for retry.)
Failed NEC ESMPRO Manager PXE Service failed to execute the network-boot
procedure.
(See2.2.2.5 "Procedure to retry configuration with NEC ESMPRO Manager
PX
E Service" for retry.)
Processing NEC ESMPRO Manager PXE Service is executing the network-boot
procedure.
(It is maximum 10 minutes after the last network-boot request from the
destination component.)
Unnecessary to process NEC ESMPRO Manager PXE Service does not execute network-boot
procedure for this computer.
(Change "Status" to this status when the computer has no BMC or when you
do not want to execute the network-boot for the computer.)