Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
54
TIPS:
 Other configuration items are set with default values. The MAC addresses of the gateway
and the alert receivers will be also set in the BMC.
(8) After the managed component has been network-booted, reboot again and change the boot priority back
to original using the BIOS Setup Utility.
See2.2.2.4 "How to confirm the status of the network-boot procedure by NEC ESMPRO Manager PXE
Service".
(9)
Click NEC ESMPRO Manager "Linkage Service" to display the "PXE Service" screen, and stop the
NEC ESMPRO Manager PXE Service.
2.2.2.4 How to confirm the status of the network-boot procedure by NEC ESMPRO
Manager PXE Service
You can confirm the status of the network-boot procedure by NEC ESMPRO Manager PXE Service with the
order below.
(1) Click "Linkage Service" of "Tools" from the "header menu" on the NEC ESMPRO Manager. Click
"Refresh" on the "Computer Information List" screen.
The latest status of the network-boot procedure for each destination component will be shown.
TIPS:
 You can also confirm the status on the computer information by using
NEC ESMPRO Manager PXE Service Management tool. To use the tool, start "NEC
ESMPRO Manager PXE Service Management" of the "NEC ESMPRO Manager PXE
Service" from start menu of Windows on the NEC ESMPRO Manager server.