Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
53
(4)-(b)-(iii) Specify the path name of the computer information list file on "Bundle addition"
screen. Click "Add".
(4)-(b)-(iv) "Apply" will be displayed on the "Computer Information List" screen. Click
"Apply".
(5) Change the boot device priority so that the highest priority will be given to network-boot devices, using
the managed component's BIOS Setup Utility.
TIPS:
 If the managed component is Blade Server, the network-boot is initially set with the highest
priority.
(6) If you set "Default Gateway" at creating the configuration information file, please connect the managed
component via LAN port used by BMC and the gateway to network.
If you set "Alert Receiver / Management PC IP Address" on same network with the managed
component at creating the configuration information file, please connect the managed component via
LAN port used by BMC and the alert receiver/management PC to network.
(7) Reboot the Operating System.
The NEC ESMPRO Manager PXE Service accepts a network-boot request from the managed
component, confirms the managed component's MAC address, configures the IP address and computer
name that have been specified in the computer information, and then reboots the Operating System.
-- IP Address
Specify the IP address specified on computer information.
-- Computer Name
Specify the computer name specified on computer information.