Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
51
(4)-(a)-(ii) The information should be input on "Individual addition" screen.
Enter the MAC address of the component that you want to request network-booting.
Enter the computer name and IP address that will be set in BMC configuration by NEC ESMPRO
Manager PXE Service.
Check that "Status" indicates "Not Processed", and then click "Add".
(4)-(a)-(iii) "Apply" will be displayed on the "Computer Information List" screen.
Click "Apply".
(4)-(b) Register a computer information list file that includes plural computer information records.
(4)-(b)-(i) Create computer information list file.
The computer information list file has the CSV format. Specify one record of information on each
line.
The file name extension should be ".csv".
The 1-record format is as follows:
"MAC-Address,Computer-Name,IP-Address"
You should write only one record per line. You cannot input any other characters on the line.
-- MAC Address
Specify the MAC address of the managed component on which configuration information is to be
set.
-- Computer Name
Enter a comma "," as a delimiter between the MAC address and computer name. Following the
comma, specify the computer name to be set for the managed component.