Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide

"Management controller management (Common)"

--"Management"

If NEC ESMPRO Manager manages the "Management controller" on the managed component,

select "Registration".

--"Management Type"

Select "BMC".

--"Authentication Key"

Enter the "authentication key" that you set in the "BMC configuration information" of the managed

component.

"Management controller management (LAN)"

--"IP Address 1"

Enter the IP address that is specified on LAN1 of the BMC configuration for the managed

component.

--"Subnet Mask1"

Enter the subnet mask that is specified on LAN1 of the BMC configuration for the managed

component.

The following screen shows an example.

(4) Click "Add".

TIPS:

 A managed component cannot be controlled remotely by only registering it. Perform a

"Check Connection".