Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
11
(4) "Miscellaneous" screen will be displayed.
Be sure to set the following items. The other items can be used with the default values.
-- "ESMPRO Management"
Click "Enable".
-- "Authentication Key"
The following screen shows example.
CHECK:
 If a managed component supports SOL and "Redirection" is selected to "Enable", you must
change the following items for the remote console via the LAN.
"Configuration" page – "System BIOS" page – "Flow Control": Hardware RTS/CTS
(5) Select "Apply".
The configuration information is set in the BMC.