Installation Guide

NEC ExpressUpdate Agent Installation Guide
18
4.2 The change of the IP address of Operating System
If the IP address of operating system on the managed server is changed, NEC ExpressUpdate Agent restarts
automatically to recognize changed IP address and update the latest status.
4.3 Windows Firewall
NEC ExpressUpdate Agent registers following programs automatically in exception program of firewall on
the managed server when the installation is executed.
-- axis2_http_server
-- slpd
4.4 Linux Firewall
NEC ExpressUpdate Agent sets port numbers to firewall when it starts up. If you change the firewall setting
from disable to enable or configure the setting by Security Level Configuration screen after NEC
ExpressUpdate Agent starting up, the firewall setting of NEC ExpressUpdate Agent will be lost.
In this case, please execute the following process to reset the firewall setting of NEC ExpressUpdate Agent.
(1) Login to Linux as root user.
(2) Move to the directory in which the shell script for setting exists.
cd /opt/nec/axis2c/bin
(3) Execute following shell script.
./eci_setport.sh
4.5 The Server Management Driver on the managed server
Though EXPRESSSCOPE Engine series is integrated in the managed server, the current version of BMC
firmware is displayed "unknown". It is thought that the Server Management Driver will not be installed in the
managed server. In this case the installation of BMC firmware update package cannot be executed. Please
install the Server Management Driver as follows.
1. on Windows
Execute system update by the menu of NEC EXPRESSBUILDER.
2. on Linux
From the following web site, download the Server Management Driver which supports the managed
server and kernel version, and install it.
http://www.nec.com/express/