Configuration Guide

CONFIGURATION GUIDE – NEC Express5800/R120d-2E Storage-Rich
NEC Corporation Revision 1.0, May 2012 29
Category
Product Name / Description
Part Number
SAS
SSD
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
N8150-709
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
N8150-710
SATA
SSD
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
N8150-707
NOTE:
 All hard drives within a RAID array should be of the same capacity and rotation speed.
 Up to two kinds of drives can be mixed in a HDD cage.
5 Optical Drive
Category
Product Name / Description
Part Number
External
External DVD-ROM drive
Slim DVD-ROM drive, Bus powered, 0.8 A required
N8160-85
NOTE:
 Up to 1 optical drive can be connected.
6 Internal Tape Drives
6.1 Tape Drive Selection
Refer to the section in accordance with your type of tape drives:
 DAT: Refer to 6.2.1
NOTE:
 Tape devices cannot be directly connected to VMware systems. For VMware systems, it is
recommended to connect and configure an additional backup server via network.
6.2 Tape / RDX Configuration
6.2.1 DAT
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port
(Standard)
Cable
Internal USB cable
1 x Internal USB to 1 x USB device
(Standard)
Drive
1 bay available
Internal DAT (USB)
DDS3 / DDS4 / DAT72, Native capacity 36 GB
NOTE: DDS1 / DDS2 format are not supported
N8151-69
Internal DAT (USB)
DDS4 / DAT72 / DAT160, Native capacity 80 GB
NOTE: DDS1 / DDS2 / DDS3 format are not supported
N8151-78