User's Guide

1. Installing Internal Optional Devices
Express5800/R120d-1E User’s Guide
93
Chapter 2 Preparations
1.17.1
Installation
Install a Hard Disk Drive by using the following procedure.
Important
In the RAID System, build a Disk Array using Hard Disk Drives that have the
same specifications (capacity, rotational speed, and standard).
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the slot where you install the Hard Disk Drive.
The server provides 4 slots. Install Hard Disk Drives in ascending port number order. For details, refer to
Chapter 2 (1.17 3.5-inch Hard Disk Drive).
3. Remove the dummy trays.
Important
 Keep the dummy trays for future use.
 Dummy trays are intended to increase the cooling effect inside the
server. Keep the dummy trays installed in slots where Hard Disk Drives
are not installed.
4. Unlock the handle of the drive carrier.