User's Guide

1. Installing Internal Optional Devices
Express5800/R120d-1E User’s Guide
87
Chapter 2 Preparations
If using optional RAID Controllers for Express5800/R120d-1E 3.5-inch hard disk drive models
(1 to 4 units)
Optional RAID Controller Hard Disk Drive Backplane board
SLOT 0 SATA 0
SLOT 1 SATA 1
SLOT 2 SATA 2
SAS 1
(Ports 0 to 3 or
Ports 1 to 4)
SLOT 3 SATA 3
 
 
 
SAS 2
(Ports 4 to 7 or
Ports 5 to 8)
 
RAID Controller
SAS cable
SGPIO cable
Connect the first pin of the cable (marked with

) to the first pin of the SGPIO1 connector
(marked with a bold line) on backplane.
SGPIO1 connector
Marked with
a bold line