User's Guide

1. Installing Internal Optional Devices
Express5800/R120d-1E User’s Guide
67
Chapter 2 Preparations
4. Connect the cable to the additional
battery.
When connecting the cable, orient
the cable so that its marking will fit
the connector.
5. Remove the two screws, and
remove cover of battery bracket.
6. Install an extra battery to processor
duct, and secure it with the cover of
battery bracket you have removed
in Step 5.
For position to install an additional
battery, see the figure to the right.
(The number indicates installation
order.)
Note
Make sure that catches (2 places) are surely engaged with extra battery.
①
②
Blue line at left end
With battery plate facing upward
Screw
Screw