User's Guide

1. Installing Internal Optional Devices
Express5800/R120d-1E User’s Guide
56
Chapter 2 Preparations
14. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
15. Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to Chapter 2 (1. System BIOS) in
"Maintenance Guide".
Advanced  Processor Configuration  Processor Information
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
1.9.2
Replacement / Removal
To remove processor (CPU), reverse the installation procedure.
Important
 Do not remove any processor unless it is failed.
 To remove the heat sink from the processor, first turn the heat sink to the left
and right lightly to make sure that the heat sink can be apart from the
processor. Removing the heat sink with it adhering to the processor may cause
the processor and/or CPU socket to be defected.