User's Guide

1. Installing Internal Optional Devices
Express5800/R120d-1E User’s Guide
51
Chapter 2 Preparations
1.8
TPM Kit
This section describes the procedure for installing optional TPM Kit.
(Illustration below shows Express5800/R120d-1E, as an example.)
1.8.1 Installation
Install TPM Kit in the following procedure.
Note
The TPM kit once installed cannot be removed.
1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Lift the air duct and remove it.
3. Install TPM Kit and secure it by pushing the
nylon rivet provided with TPM Kit.
TPM kit connector