User's Guide

4. Names and Functions of Parts
Express5800/R120d-1E User’s Guide
36
Chapter 1 General Description
4.6
Motherboard
Express5800/R120d-1E
(1) Processor (CPU) socket
-1 Processor#1 (CPU#1)
-2 Processor#2 (CPU#2)
(2) DIMM slots
(the number after hyphen indicates slot number)
(3) SATA Optical Disk Drive power connector
(4) HDD BP power connector
(5) Front Panel connector
(6) Front VGA connector
(7) HDD BP Signal connector
(8) USB connector (front)
(9) USB memory module / USB Back Up Device connector
(10) Lithium battery
(11) PSU connector
-1 default (POW#1)
-2 redundant (POW#2)
(12) SATA Optical Disk Drive signal connector
(13) SATA connector
(14) Buzzer
(15) COM connector (for Option N8117-01A)
COM port B when N8117-01A is used.
(16) SPI mezzanine card connector
EXPRESSSCOPE Profile Key has been installed, where
BIOS and BMC configuration data is stored. Move it when
replacing MB to keep using the data
(17) TPM Kit connector
(18) FAN connector
-1 FAN1F/R
-2 FAN2F/R
-3 FAN3F/R
-4 FAN4F/R
-5 FAN5F/R
-6 FAN6F/R
-7 FAN7F/R
-8 FAN8F/R
(19) Clear Password Jumper
(20) RAID Configuration Jumper
(21) Clear CMOS Jumper
(22) EXPRESSBUILDER Kit connector
(23) External connector
(24) PCI Riser connector
-1 Riser A
-2 Riser B
-3 Riser C
Refer to Chapter 2 (1.13 PCI Card) for available card.
Rear of
server
(8)
(1)-1
(1)-2
(13)
(5)
(6)
(12)
(2)
(17)
(23)
(24)
(15)
(7)
(22)
(3)
(4)
(11)-1
(9)
(19)
(20)
(11)-2
(21)
(10)
(18)-1
(18)-2
(18)-3
(18)-4
(18)-5
(18)-6
(18)-7
(18)-8 (16)
(14)
Front of
server