User's Guide

2. Installation and Connection
Express5800/R120d-1E User’s Guide
113
Chapter 2 Preparations
(a) Removing Outer Rail
Remove outer rails from the rack in the following procedure.
1. Refer to Chapter 2 (2.1.1 Installing the server to the rack or removing it from the rack, Removal
procedure) to remove the server from the rack.
2. Push the unlock lever on outer rail to the direction shown by arrow to house the slide rail.
3. While pressing the lever on outer rail, push the outer rail toward inside of the rack, then remove it.
Locking mechanism Unlock lever