User's Guide

– [Password]:

To gain the Remote Access Service, enter a password of the selected entry.

– [Port number]:

The port number used for the communication between sockets can be set.

For this number, the same value must be set to the Agent and remote Manager (the default value is 31134

for both Agent and remote Manager).

Do not change the value as long as the default value works.

If the default value does not work, set the port number in the range of 6001 to 65535.

Clicking the [Default] button resets the number to the default value (31134).

If a modification is made, be sure to also modify the setting for the remote manager. This

modification is made in the setting of TCP/IP receive in the [Receive from Agent (TCP/IP)

Setting] dialog of the base setting by executing the Alert Manager setting tool on the server in

which Manager is installed.

– [OK]:

Set information is added and this dialog box closes.

– [Cancel]:

This dialog box closes with no set information added.

– [Test]:

For the test report, press this button.

The test result can be checked by a message.

Internet Mail

For the base setting, make the following settings.

 [Internet Mail Base Setting] dialog

– [Mail Server (SMTP)]:

Specify either an IP address or the name the Internet Mail Server will be using. (This Mail Server needs to

support SMTP.)