User's Guide

– Source:
Source name is displayed.
– Event ID:
Event ID is displayed.
– Event Message:
Message is displayed.
– Destination ID List:
An ID list is displayed.
– Report To:
A report object ID list is displayed.
– Add button:
An ID selected from the Destination ID list is moved to Report To.
– Remove button:
IDs selected from the Report To list are moved to the Destination ID list.
– ID list:
Information for IDs selected from the Destination ID and Report To lists is displayed.
– Group list:
Information for IDs selected from the Destination ID and Report To lists is displayed.
To Make a Setting
1. Select the ID to be reported from the Destination ID list.
2. Clicking on Add moves the ID to the Report To list.
3. To delete IDs from report objects, select the ID from Report To list and click on Remove to move the ID to the
Destination ID list.
4. Click on OK.
Setting According to Report Method
2.5.3
 To set the base setting
Use the [Report] property sheet of the [Base Setting] dialog to select the method from the list and make the
setting in the dialog displayed by pressing the [Configure...] button.
To report the Alert, make settings by clicking the function status bitmap and change to green.
 To set destination setting
Select the method from the method list at the time of ID setting in the [Destination Setting] dialog and make
the setting in the dialog displayed by pressing the [Address...] button.
Manager Report (SNMP)
No item is provided to set in Alert Manager for the base setting and destination setting.
Make the setting of the SNMP service in Control panel [Network] of Windows.
Set also a destination of the remote manager using the SNMP service.
28