User's Guide

49
Referring to Property of Battery
For the information on a Battery on RAID Controller, see the property of the Battery by RAID Viewer and, see the property
of the RAID Controller by raidcmd.
To display the property of Battery by RAID Viewer, click the
Battery whose information is to be seen on the Tree View and
click [Properties] on the [File] menu.
The [General] tab indicates the property of the Battery.
Item
RAID Viewer
Description
Status Indicates the status of the Battery installed in the RAID Controller.
Three possible status are as follows:
Normal: Indicates that the Battery can be used normally.
Warning: Indicates that the Battery cannot be used normally due to some reason.
Referring to Property of Logical Drive
For the information on a Logical Drive, see the property of the Logical Drive.
To display the property of Logical Drive by RAID Viewer, click
the Logical Drive whose information is to be seen on the
Tree View and click [Properties] on the [File] menu.
The [Logical Drive Properties] dialog box contains the
[General] and [Option] tabs.
The [General] tab indicates the property of the Logical Drive.
The [Option] tab allows you to see the settings of the Logical
Drive.
You can change the settings in the Advanced Mode.
Use "property" command to see property of a Logical Drive
by raidcmd.
-tg : Specify "ld" to see property of a Logical Drive
-c : Number of the RAID Controller
-l : Number of the Logical Drive
Ex. Refer to the property of the Logical Drive with RAID
Controller Number:1 and Logical Drive Number:2.
raidcmd property -tg=ld -c=1 -l=2
>raidcmd property -tg=ld -c=1 -l=2
RAID Controller #1 Logical Drive #2
ID : 1
Disk Array Information : 2 (order 1/1)
RAID Level : RAID 5
Capacity : 10GB
Stripe Size : 64KB
Cache Mode (Setting) : Auto Switch
Cache Mode (Current) : Write Back
Type : Logical Drive
Status : Online
>