User's Guide

37
Assigning Physical Device Number
The policy to assign Physical Device Number is changed in Universal RAID Utility Ver2.5.
In Universal RAID Utility Ver2.4 and the earlier versions, the number starting from 1 is assigned to each
Physical Device in the ascending order of the ID of Physical Devices. From Ver2.5, the policy has been
changed that the Physical Device number is assigned based on the enclosure number and slot number, in the
format “
e<enclosure number>s<slot number>”.
When you install Universal RAID Utility Ver2.5 in the environment where Universal RAID Utility Ver2.4 has been
installed, the order of Physical Devices may change. See the property of the Physical Device to check the ID of
the Physical Device. For details on the property of Physical Devices, see “Referring to Property of Physical
Device”.
Figure 3 Physical Device Number
Shortcut Menu
Right-clicking the node of RAID Controller, Disk Array, Logical Drive, Physical Device and Battery allows the
shortcut menu to appear. On the shortcut menu, you can display the property and execute the something
operation. See "Menu Bar" for detail of each function.
Universal RAID Utility Ver2.5
Universal RAID Utility Ver2.4