User's Guide

12
after displaying the version of Universal RAID Utility by executing raidcmd without parameters. See
“RAID System Configuration” for details.
 Support of the Logical Drive with the level of RAID 60
Universal RAID Utility Ver2.5 supports the display, operation, deletion of the RAID 60 Logical Drive.
Creation of the RAID 60 level Logical Driver is not available. Use the configuration utility of the RAID
Controller to create RAID 60 level Logical Drive.
9. Log/Events
 Enhancement of the Physical Device Monitoring
The events indicating “Physical Device Warning Error” and “Physical Device Fatal Error” are available
when a specific error of Physical Devices are detected.
 Fatal FW Error
Universal RAID Utility Ver2.5 monitors the events of the fatal FW Error that is detected by the RAID
Controller. The event is notified at the start of Universal RAID Utility when a fatal FW error occurs and
the system is down.
10. Support of RAID System management by NEC ESMPRO Manager Ver. 5.5 or later.
Universal RAID Utility Ver2.4 has supported RAID System management and monitoring with NEC
ESMPRO Manager Ver 5.3 or later versions. Universal RAID Utility Ver2.5 supports NEC ESMPRO
Manager Ver5.5 or later versions.