User's Guide

105
Refreshing the battery of the RAID Controller
The Battery Refreshing is a function to refresh the battery connected to the RAID Controller. The function restores the
battery degraded due to charge and discharge.
Universal RAID Utility provides the function to manually execute the battery refreshing. The function can be done for
each RAID Controller.
You can use a Windows task scheduler to do a regular battery refreshing.
Some types of RAID Controller do not support Battery Refreshing. If it does not support this
function, the "
refresh
" command of raidcmd is failed.
Executing Battery Refresh Manually
The procedure of executing the battery refreshing is described below.
The battery refreshing in manual is available only in the Advanced Mode.
RAID Viewer
Step 1 Start the RAID Viewer. Click the battery on the Tree View. Then
click [Refresh Battery] on the [File] menu.
Step 2 The confirmation windows will open. Click [Yes] to execute the
battery refreshing. Click [No] to cancel the battery refreshing.