Installation Guide

77
BMC settings
You can change the BMC Configuration Information from [BMC Setting] of the NEC ESMPRO Manager.
For details of [BMC Setting], see the online help of the NECESMPRO Manager.
The default BMC values set by selecting [Default Value] in NEC ESMPRO Manager and by executing "BMC I
nitialization" are shown below.
*Pink cells are differences.
NEC ESMPRO Manager BMC Initialization
Network
Property Management LAN Management LAN Management LAN
Connection Type Auto Negotiation Auto Negotiation
DHCP Disable Disable
IP address 192.168.1.1 192.168.1.1
Subnet Mask 255.255.255.0 255.255.255.0
Default Gateway 0.0.0.0 0.0.0.0
DNS Server 0.0.0.0 0.0.0.0
Host Name
Blank
"BMC" + MAC addre
ss
Domain Name Blank Blank
Access Limitation Type Allow All Allow All
Service HTTPS Enable Enable
HTTPS Port 80 80
HTTP Enable Enable
HTTP Port 443 443
SSH Enable Enable
SSH Port 22 22
Alert
Mail Alert Alert Disable Disable
Waiting time for SMTP s
erver's responseAlert
30 30
To:1
Enable Disable
To:2 Disable Disable
To:3 Disable Disable
From Blank Blank
Reply-To Blank Blank
Subject Blank Blank
Server 0.0.0.0 0.0.0.0
Port 25 25
Authentication
Disable Enable
Alert Level
Error, Warning Separate Setting
SNMP Ale
rt
Alert Disable Disable
Computer Name Blank Blank
Community Name public public
Alert Progress One Alert Receiver One Alert Receiver
Alert Acknowledge
Enable Disable
Alert Receiver1 IP Addre
ss
Enable Disable
Alert Receiver2 IP Addre
ss
Disable Disable
Alert Receiver3 IP Addre
ss
Disable Disable