Installation Guide

70
Appendix
Port numbers / Protocols
NEC ESMPRO Manager uses the following port numbers and protocols.
In case of two-way protocol, upper arrow shows that connection starts, and lower arrow shows that connection turns.
In case of port No. unknown, unused port is used to start connection.
[Web Client <->Management PC]
Web Client Management PC
Function
Component Port No.
Protocol
/Direction
Port No. Component
Management/ monitoring Web Browser Unknown
TCP
->
<-
8080(*1) NEC ESMPRO Manager
*1 You can change the port number at the installation or see the [Changing the port number].
[Management PC <->Managed Server]
Management PC Managed Server
Function
Component Port No.
Protocol
/Direction
Port No. Component
SNMP report to Manager NEC ESMPRO Manager 162
UDP
<-
Unknown NEC ESMPRO Agent
TCP/IP report to
Manager(TCP/IP in Band)
NEC ESMPRO Manager
31134
(*1)
TCP
<-
->
Unknown NEC ESMPRO Agent
Auto Registration
Server Monitoring (SNMP)
NEC ESMPRO Manager Unknown
UDP
->
<-
161 NEC ESMPRO Agent
Auto Registration NEC ESMPRO Manager --
ICMP
->
<-
-- NEC ESMPRO Agent
BMC Setting
NEC ExpressUpdate
NEC ESMPRO Manager Unknown
TCP
->
<-
443(*2) BMC
Alert from BMC NEC ESMPRO Manager 162
UDP
<-
623 BMC
Server Monitoring NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC
Information Collection
(through BMC)
NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC
Remote Batch NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC
Operation with Command
Line I/F
NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC
Power Control NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC
Remote Console
(CUI, SOL)
NEC ESMPRO Manager 47117(*3)
UDP
->
<-
623 BMC