Installation Guide

58
♦CUI Remote Console after Windows boot
 If the managed server does not support SOL, Remote Console of SAC (Special Administration Console) of
Windows cannot be executed via LAN.
 To execute the CUI remote console function of the SAC screen after Windows boot, select [Server]-[Console
Redirection] and change [ACPI Redirection] to [Enable] on the BIOS Setup Utility screen of the managed server.
When [ACPI Redirection] is set to [Enable] on the BIOS Setup Utility screen, the CUI remote console function
cannot be executed after POST.
If [ACPI Redirection] does not exist on the [Console Redirection] menu, confirm that [Console Redirection after
POST] is enabled.
♦Shutdown OS
When the following operation is performed on the managed server running Windows Server 2008 or later, the
cancellation dialog box may not be displayed.
 OS shutdown by NEC ESMPRO Manager.
 OS shutdown by scheduled running function.
♦Shutdown OS during DC-OFF state by scheduled running
When [Agent Setting] - [Shut down OS after DC-ON during Scheduled Running Halt] on NEC ESMPRO Manager is
enabled, the DianaScope Agent or NEC ESMPRO Agent Extension shutdowns OS if the managed server is powered
up during the down period (DC OFF state time by scheduled running).
Only if the managed server is powered up from NEC ESMPRO Manager, DianaScope Agent or NEC ESMPRO Agent
Extension does not shutdown OS. However, in case that any error is occurred during booting, DianaScope Agent or
NEC ESMPRO Agent Extension may shutdown OS even though power up by NEC ESMPRO Manager.