Installation Guide

56
♦The end of the network-boot procedure of NEC ESMPRO Manager PXE Service
Do not operate the destination server until network-boot procedure of NEC ESMPRO Manager PXE Service completes.
When you have some operation before that, the NEC ESMPRO Manager PXE Service cannot be stopped from the
NEC ESMPRO Manager.
For completion of the network boot, see "2.2.2.4 How to confirm the status of the network-boot procedure by NEC
ESMPRO Manager PXE Service" in "NEC ESMPRO Manager Ver.5 Setup Guide".
♦Setting a Windows Firewall
If the Windows Firewall is enabled on the management PC, NEC ESMPRO Manager PXE Service may not be
executed BMC configuration.
In such a case, open the following ports on the management PC:
[Target ports]
Name(Can be changed) Port number Protocol
An arbitrary name 67 UDP
An arbitrary name 69 UDP
An arbitrary name 4011 UDP
An arbitrary name 31200 UDP