Installation Guide

52
♦If communication with a monitored server becomes disabled
If communication with a monitored server becomes disabled due to server down or network problem during display of
the status of the server, the server icon of the group or chassis shows unknown status. In this case, the status color of
the configuration information tree item may not indicate the latest status. Click the server icon from the group or chassis
to display the latest information.
♦Changing the configuration of the servers
If you change the configuration of the servers (such as attaching or removing HDDs) with the [Information of server
state/constitution] tree displayed, the changes will not be reflected to the [Information of server state/constitution] tree.
After changing the configuration, click the target server icon displayed in the [Group] or [Chassis] tree to update the
[Information of server state/constitution] tree.
♦Display of the Information of EM Card state/constitution
To update the monitoring display in case of EM Card configuration such as removing/mounting CPU blade, switching
power redundancy mode, reselect the EM card icon from the Group/Chassis tree.
♦If the page cannot be displayed on Web browser
When you start NEC ESMPRO Manager or application that is installed after NEC ESMPRO Manager installation, the
Web browser may displays "The page cannot be displayed." or "The server cannot be found." and the page cannot be
displayed. In this case, the port number of NEC ESMPRO Manager and other application may be overlapped. See the
procedure on "Coexistence with Tomcat" in "6.1 After Installation".
♦RAID operation
See the User's Guide of Universal RAID Utility (after Ver.2.1) installed on the managed server for notes about the
operation of RAID system with [Information of server state] navigation tree.
♦Alert driven status control function
The alert driven status control function which is supplied as a Windows application can not be used on the Web
browser interface. If the function is enabled, there is the possibility that you misunderstand the status of the managed
servers, because the server status color on the Web browser of the client side changes by starting, operating, or exiting
the AlertViewer (Windows application) on the Web server side. It is recommended that you disable the alert driven
status control function.