Installation Guide

♦Settings on standalone environments without network connections

When you install the NEC ESMPRO Manager and the NEC ESMPRO Agent on a machine together, if the machine is

not connected to the network, take the following steps to monitor the machine itself.

 Specify 127.0.0.1 for Start Address and End Address as a range for the Auto Registration.

 Specify 127.0.0.1 for the SNMP trap destination.

If you have already registered server, execute Auto Registration after deleting it.

♦NEC ESMPRO User Group

Since security for the NEC ESMPRO Manager is managed by the NEC ESMPRO User Group (by default,

Administrators), the NEC ESMPRO Manager never starts without accessing this group.

Note the following:

 Do not delete/change the NEC ESMPRO User Group after installing the NEC ESMPRO Manager.

 When the NEC ESMPRO User Group is registered as a global group member, it is necessary to start the Domain

Controller before the Manager machine boots.

♦To upgrade your operating system

Otherwise uninstall the NEC ESMPRO Manager first and upgrade the operating system. To upgrade the operating

system to other than the following operating system, uninstall the NEC ESMPRO Manager first and upgrade the

operating system.

- Windows Server 2003, Windows Server 2003 R2

- Windows Vista

- Windows Server 2008

♦Display of the Information of server state/constitution

In case that NEC ESMPRO Manager has been updated from Ver. 5.23 and below, The display of the selected item on

the [Information of server state/constitution] may take long time with the hardware constitution of the managed server.

Perform the followings in this case:

 Change the "Update Interval" value of "Automatically update display" setting from 5 seconds (default value) to 60

seconds.

The changing of the automatic update interval by JavaScript will reduce the load of NEC ESMPRO Agent on the

managed server, and so allows NEC ESMPRO Manager to display the DataViewer quickly.

[Environment setting]

- [Option Setting] - [Automatically update display] - [Update Interval]