NEC ESMPRO Manager Ver. 5.5 Installation Guide (Windows) Chapter1 Introduction Chapter2 NEC ESMPRO Manager Chapter3 System Requirements Chapter4 Before Installation Chapter5 Installation Chapter6 After Installation Chapter7 Uninstallation Chapter8 Notes Appendix E5.
Contents Contents..........................................................................................................................................................................2 Abbreviations of Operating Systems...............................................................................................................................3 Trademarks......................................................................................................................................................
Abbreviations of Operating Systems Windows Operating Systems are referred to as follows.
Trademarks EXPRESSCLUSTER is a registered trademark of NEC Corporation. Microsoft, Windows, Windows Vista, Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. NetWare is a registered trademark of Novell, Inc. of the United States. Intel and Intel vPro are registered trademarks or trademarks of Intel Corporation in the United States and other countries.
External Libraries This product contains libraries (“External Libraries”) provided by the third party suppliers ("Suppliers"). Assume and agree these libraries' license documents and NOTICE files before using this product.
♦External Libraries and their Copyright activation Copyright©Sun Microsystems, Inc. annogen Copyright©The Codehaus. antlr Developed by jGuru.com, http://www.ANTLR.org and http://www.jGuru.
asm-attrs Copyright©INRIA, France Telecom backport-util-concurrent Copyright©Distributed Computing Laboratory, Emory University bcprov-jdk Copyright©The Legion Of The Bouncy Castle (http://www.bouncycastle.org) c3p0 Copyright©Machinery For Change, Inc. cglib Copyright©cglib dom4j Copyright©MetaStuff, Ltd. DWR Copyright©Joe Walker ehcache Copyright©Luck Consulting Pty Ltd Hibernate Copyright©Red Hat Middleware, LLC. imrsdk Copyright© Intel Corporation jalopy Copyright©Marco Hunsicker.
OpenSAML Copyright©Internet2. OpenSSL Copyright©The OpenSSL Project prototype.js Copyright©Sam Stephenson sblim cim-client http://sourceforge.net/apps/mediawiki/sblim/index.php?title=CimClient sortable Copyright©Stuart Langridge vSphere Web Services SDK http://communities.vmware.com/community/vmtn/developer/forums/managementapi WISEMAN Copyright©Sun Microsystems, Inc.
Attention and supplementation with this book 1. Unauthorized reproduction of the contents of this document, in part or in its entirety, is prohibited. 2. The contents of this document may change without prior notice. 3. Do not make copies or alter the document content without permission from NEC Corporation. 4. Every effort has been made to ensure the completeness of this document. However, if you have any concerns, or discover errors or omissions, please contact your retailer. 5.
1. Introduction This document describes a system management utility NEC ESMPRO Manager. The contents in this document are intended for users who fully understand features and operations of operating systems related to this utility. If you want to know operations of the operating systems, or if there is any unclear point, see the online help of each operating system. ♦Notations used in the text In addition to safety-related symbols urging caution, 3 other types of notations are used in this doc ument.
2. NEC ESMPRO Manager NEC ESMPRO Manager is a software designed for reducing operational management costs by remotely managing servers. Before attempting to operate the server management utility NEC ESMPRO Manager, read this document so as to gain an adequate understanding of the contents. And the operation notes after installation are described in document of the application. See it if you need. NEC ESMPRO Manager has the following features. Some models of managed servers may not support all functions.
3. System Requirements NEC ESMPRO Manager requires the following hardware and software: 3.1 Management PC About product license NEC ESMPRO Manager can be used on a single operating system per license. • Hardware - Machine A computer on which an operating system supported by NEC ESMPRO Manager can be installed Intel Pentium 4 1.3GHz or higher, or equivalent compatible processor is recommended. - Memory Memory required for running the operating system plus 512MB or more (1GB or more is recommended.
• If you use NEC ESMPRO Manager from a browser, install JRE 5.0 and above. On a point of the security, the latest version is recommended. If JRE is not installed, some pages are not displayed correctly. • Java Applet and Java scripts must be executable. • 1024 by 768 pixels or more are recommended as a screen area in display properties. • The browser must be latest status such as applying a patch. If the status is not updated such as preinstalled, some pages may not be displayed correctly.
3.2 Managed server A server to be managed by NEC ESMPRO Manager is as follows: About the managed server integrated BMC (Baseboard Management Controller), see "Appendix C Managed Components Summary" in "NEC ESMPRO Manager Ver.5 Setup Guide". The required environment varies depending on the connection type with the managed server. See "3.3 Requirements for Connection between the Management PC and Managed Server".
3.3 Requirements for connection between the management PC and managed server Provide an environment in accordance with the connection type to be used. LAN connection - TCP/IP network • Do not use a cross cable to connect the management PC and managed server. • If you use the managed server integrated BMC, LAN port that BMC uses depends on the type of BMC. Some BMC uses standard LAN port. Other BMC uses a Management LAN Port.
Direct connection (It can be only used to connect with BMC) - RS-232C cross cable The serial port for direct connection on ESMPRO server. NEC ESMPRO Manager must be set following on the operating system. Bits per speed : It should be set a same value with a value of BMC configuration on a managed server. The default value of BMC configuration is 19.2Kbps. Data bits : 8bit Parity : None Stop bits : 1bit Flow control : Hardware (CTS/RTS) • Do not use an interlink cable.
3.4 Notes on managed servers and network devices This section explains particular notes on managed servers and network devices. Use of network switch / router If the managed server installed BMC that uses a standard LAN port or loaded Advanced Remote Management Card, and there is network switch / router between management PC and the managed servers, set the network switch / router to receive Gratuitous ARP. See each document of the switch / router about how to set it.
Setting of Teaming for LAN that DianaScope Agent or NEC ESMPRO Agent Extension uses with the OS (providing redundancy or multiplexing with multiple network adapters) on the managed server installed BMC that uses a Management LAN port If the teaming setting is made available for the LAN port that DianaScope Agent uses on the managed server installed BMC that uses a Management LAN port, see "Appendix B B.2 On the managed server that BMC uses a Management LAN port" in "NEC ESMPRO Manager Ver.5 Setup Guide".
4. Before Installation Be sure to read this page before installing this product. ♦Security settings – Setting up the NEC ESMPRO User Group To make the applications run on the management PC have proper access rights, the NEC ESMPRO User Group is needed. The NEC ESMPRO User Group name should be determined during the installation. The Manager setup names it "Administrators" by default.
♦Remote installation of NEC ESMPRO Manager When installation of the NEC ESMPRO Manager completes, you need to reboot the system. Careful attention is needed to install the program in the environment where reboot cannot be performed from the Start menu, such as on Remote Desktop of Windows XP. The operating system can be restarted by running the following command at Command Prompt: Ex.
♦If NEC MWA has been installed If MWA (Management Workstation Application) has been installed, you cannot install NEC ESMPRO Manager. Uninstall MWA. ♦Changing language settings in Windows (ex. In the case of using MUI) When changing the language settings in Windows, make sure "Japanese" is not selected in the settings below. "Japanese" is not supported, and therefore installation will fail.
5. Installation This page describes fresh installation and update installation of the NEC ESMPRO Manager. Be sure to read Before Installation before installing this product. 5.1 Installation procedure 1. Logon as a user with administrative privilege. 2. Insert the EXPRESSBUILDER into the Optical disk drive. The EXPRESSBUILDER Windows Autorun Menu is automatically displayed by the Autorun function. If the device selection window is displayed, select the device you are using.
The displayed menu varies depending on the environment. 5. Enter the user information. (For update installation, this is not displayed.) Enter your user name and company name, and then click [Next]. The user name and the company name entered here are information the NEC ESMPRO Manager manages. There are no influences to the user registration information of the operating system.
6. Select features to be added. Features that can be added to NEC ESMPRO Manager are listed. Select features you want to add and click [Next]. Features to be displayed in the list vary depending on your environment (features that can be installed are listed). If no features can be added, this dialog box is not displayed. 7. Select the installation destination. (For update installation, this is not displayed.) Select the installation target folder, and then click [Next].
The default directory for 64-bit OS is "[system drive]:¥Program Files (x86)". You cannot specify "[system drive]:¥Program Files" for the installation directory in the 64-bit OS. 8. Check the current settings. The current settings are displayed. Check them and click [Next]. 9. Enter the NEC ESMPRO User Group. (For update installation, this is not displayed.) Specify the NEC ESMPRO User Group, and then click [Next].
10. Enter the administrator name and the password. (For update installation from DianaScope Manager and NEC ESMPRO Manager Ver. 5, this is not displayed.) Create the NEC ESMPRO Manager administrator. Specify the administrator name and password, and then click [Next]. • Specify the administrator name with 1 to 16 alphanumeric characters, and the password with 6 to 16 alphanumeric characters. • Administrator name is the user name to operate NEC ESMPRO Manager with the administrator authority.
11. Input of the http connector port. (For update installation from DianaScope Manager and NEC ESMPRO Manager Ver. 5, this is not displayed.) Specify the http connector port that the NEC ESMPRO Manager uses, and then click [Next]. The useful range of the http connector port is 0-65535. 12. Enter preservation folder of update package. (For update installation, this is not displayed in case that the folder has been specified.) Specify the preservation folder of update package, and then click [Next].
This folder will be used as a repository of update packages for NEC Express Update. This folder is required plenty of space. The default preservation folder is "Installation target folder¥ESMWEB¥pkgpool". Wait until the installation completes. Some installation windows are displayed during the installation. If you click [Cancel], the installation can be aborted but the installed files are not deleted. 13. The installation completes.
5.2 Notes on installation ♦Message on NEC ESMPRO Manager install Windows Server 2008 R2 / Windows 7 installing NEC ESMPRO Manager the message that "Windows Explorer has stopped working" might be displayed. However, installation was normally completed. The system doesn't have the influence. ♦Program Compatibility Assistant dialog box A message "This program might not have installed correctly" may popup after installing NEC ESMPRO Manager complete.
6. After Installation ♦Login When the installation of the NEC ESMPRO Manager completes, check that you can login to it. 1. Access to the following address on a Web browser on the Web client. http://"the computer name installed the NEC ESMPRO Manager":"the HTTP connection port number"/esmpro/ This is an example of address to access with the HTTP connection port "8080" from the web browser on the Management PC.
When the login succeeds, the following window appears: The area on which commands, such as [AlertViewer], [Tools] are displayed is called [Header Menu]. Use these commands on the [Header Menu] to operate the NEC ESMPRO Manager. ♦Setting environment You can change the optional setting of the NEC ESMPRO Manager. Click [Environment Setting] on the [Header menu] to check the setting. For details, see the online help.
♦SSL If you need to login to the NEC ESMPRO Manager using SSL, you should change the setting of the NEC ESMPRO Manager. Perform the procedure that is necessary in order to use SSL with the NEC ESMPRO Manager as follows: 1. Create a key The Key tool is needed for creating the key using with SSL. The Key tool is contained in the JRE.
2. Change the setting of NEC ESMPRO Manager. Edit the server.xml file to enable SLL. The server.xml is in the folder ESMWEB¥wbserver¥conf on the NEC ESMPRO Manager installed folder. Open the server.xml file with an editor tool, search the description of which is specified port number 8443, and delete the comment form "". Modify the port number if you need.
♦Changing the port number You can change the available port number after installation of NEC ESMPRO Manager. An example of address to access in the HTTP connection port "8080". 1. Stop the following two services. - ESMPRO/SM Common Component - ESMPRO/SM Web Container 2. Edit the port number in the "server.xml" setting file of ESMPRO/SM Web Container service. The "server.xml" file is on the "NEC ESMPRO Manager installed folder"¥ESMWEB¥wbserver¥conf.
3. Edit shortcut file "esmpro". The "esmpro" file is on the "NEC ESMPRO Manager installed folder"¥ESMWEB. In this file, you search the following description specified port number 8080 and change the port number. 4. Start the following two services.
♦Coexistence with Tomcat When NEC ESMPRO Manager and Tomcat are installed same computer, the application software installed later will not be running correctly. In this case, you can avoid it by the following way. 1. If the following two services have started, stop the services. - ESMPRO/SM Common Component - ESMPRO/SM Web Container 2. If Tomcat service has started, stop the service. 3. Edit the server port number and connector port number in the "server.
4. - server port number - connector port number Start the following two services.
5. Start Tomcat service. • Specify the port numbers of NEC ESMPRO Manager and Tomcat not to overlap. If you change the port number of NEC ESMPRO Manager, see the preceding clause "Change the Port Number". • When you use SSL communication on Tomcat or connect Tomcat with Apache, you may need to change another port number. See Tomcat's Document for detail. ♦Update installation from an older version of NEC ESMPRO Manager If you perform update installation from the NEC ESMPRO Manager of less than version 5.
7. Uninstallation This page describes how to uninstall the NEC ESMPRO Manager. 7.1 Uninstallation procedure • Start uninstalling after the system starts completely. • Uninstallation performed immediately after the system restarts may fail. If an error message appears, try again after waiting for a while. 1. Logon as a user with administrative privilege. 2. Exit all running applications. 3. Perform uninstallation. Start up [Programs and Features] (or [Add or Remove Programs]) from [Control Panel].
5. Confirmation for uninstallation. Confirm that any applications related to NEC ESMPRO are not running, and click [OK]. The selected features will be uninstalled. 6. Confirmation for deletion of the folder. (If there is no folder of update package, this dialog box is not displayed.) Select whether you delete the preservation folder of update package, and click [Next]. Wait for a while until the uninstallation completes. During the uninstallation, some uninstallation windows will appear. 7.
7.2 Notes on Uninstallation ♦Message after NEC ESMPRO Manager Uninstall Windows Server 2008 R2 / Windows 7 uninstalling NEC ESMPRO Manager the message that "Windows Explorer has stopped working" might be displayed. However, uninstallation was normally completed. The system doesn't have the influence. ♦Program Compatibility Assistant dialog box A message "This program might not have uninstalled correctly" may popup after uninstalling NEC ESMPRO Manager complete.
8. Notes Check the following points after installing the NEC ESMPRO Manager: 8.1 NEC ESMPRO Manager ♦Installation If you install the NEC ESMPRO Manager on Windows Server 2003 or Windows Server 2008 and later, do not delete user account "Administrator" from "Impersonate a client after authentication" of "Local Security Policy". NEC ESMPRO Manager cannot be downgraded to the older version. If you want to use the older version, uninstall the current version and then install new version.
♦Setting a Windows Firewall If the Windows Firewall is enabled, communication of the NEC ESMPRO Manager with a Web client and a managed server will be interrupted and the system will not work correctly. To use NEC ESMPRO Manager with the Windows Firewall enabled, open the required ports. For ports used by NEC ESMPRO Manager, see "Appendix Port numbers / Protocols".
♦Remote console before OS boot or during DOS program running If a graphic screen is displayed on a managed server, data cannot be displayed correctly on the CUI remote console. The CUI remote console screen is displayed only when the managed server displays a text screen.
♦Power management If you set the value on the managed server which does not support power management, you cannot put back the value to "unsetting". Set "zero" to each value, it is accepted as "unsetting". The electric power value might not necessarily reach even the value of Power Cap value. The electric power control lowers the power consumption of the system by lowering the frequency of CPU / Memory. When CPU / Memory Throttling value reaches 100%, the electric power value doesn't fall any more.
♦Remote Control When all the following conditions are satisfied, remote control cannot be executed from NEC ESMPRO Manager. NEC ESMPRO Manager is installed on the server whose operating system is Windows since Windows Vista or Windows Server 2008. The managed server has either following BMC. - BMC uses standard LAN port - Advanced Remote Management Card or equivalent BMC The managed server has been power off.
♦Coexistence of NEC ESMPRO Manager with other vendor's SNMP management application When another vendor's SNMP management application which receives an SNMP trap is used along with NEC ESMPRO Manager, one of them may fail to receive the SNMP trap due to a conflict between the two applications. Through the following procedures, the situation can be avoided.
♦Settings on standalone environments without network connections When you install the NEC ESMPRO Manager and the NEC ESMPRO Agent on a machine together, if the machine is not connected to the network, take the following steps to monitor the machine itself. Specify 127.0.0.1 for Start Address and End Address as a range for the Auto Registration. Specify 127.0.0.1 for the SNMP trap destination. If you have already registered server, execute Auto Registration after deleting it.
♦Display of the network speed When you monitor Linux servers, Speed will not be displayed on the Network General view of the [Information of server state]. In such a case, check it on the monitored server. When you monitor Windows servers which have network interfaces of which speeds are 10Gbps or over, Speed may not be displayed correctly on the Network General view of the [Information of server state]. In such a case, check it on the monitored servers.
♦Power saving mode of the operating system When a computer on which NEC ESMPRO Manager is installed goes into a power saving mode, all features of NEC ESMPRO Manager (such as alert reception, server status monitoring and automatic statistical data collection) stop. It is recommended that you disable the power saving mode.
♦Auto Registration Even if managed servers that are registered only to the Operation Window are out of the search range for Auto Registration, they are listed in the Auto Registration list and registered to the NEC ESMPRO Manager as managed servers. If any server that is not supported, such as NEC ESMPRO Agent Ver.4.1 or prior, is included in the search range for Auto Registration, the server is not registered to NEC ESMPRO Manager. However, it is registered to the Operation Window.
♦If communication with a monitored server becomes disabled If communication with a monitored server becomes disabled due to server down or network problem during display of the status of the server, the server icon of the group or chassis shows unknown status. In this case, the status color of the configuration information tree item may not indicate the latest status. Click the server icon from the group or chassis to display the latest information.
8.2 NEC ExpressUpdate ♦Installation of NEC ExpressUpdate Agent To use the function of "Installing NEC ExpressUpdate Agent", following configurations are necessary. *1 Change following configurations with the user belongs to the Administrators group. *2 See" Appendix Port numbers / Protocols" for network ports and protocols which this function uses. Windows XP 1) Configure Windows Firewall Configuration.
Windows Server 2008 1) Configure Windows Firewall. [Control Panel] - [Security] - [Windows Firewall] - [Allow a program through Windows Firewall]-Select [Exceptions] tab and check [File and Printer Sharing]. 2) Configure UAC Configuration. [Control Panel] - [User Accounts] - [User Accounts] - [Turn User Account Control on or off]-uncheck [Use User Account Control(UAC) to help protect your computer]. Windows Server 2008 R2 1) Configure Windows Firewall.
8.3 NEC ESMPRO Manager PXE Service ♦Installation NEC ESMPRO Manager PXE Service Installer cannot upgrade from NEC ESMPRO Manager PXE Service under Ver.1.01.01. Uninstall the older version, and then install new version. Note: All the registered information will be deleted as the result of the uninstalling. NEC ESMPRO Manager PXE Service Installer cannot downgrade to the older version. If you want to use the older version, uninstall the current version and then install older version.
♦The end of the network-boot procedure of NEC ESMPRO Manager PXE Service Do not operate the destination server until network-boot procedure of NEC ESMPRO Manager PXE Service completes. When you have some operation before that, the NEC ESMPRO Manager PXE Service cannot be stopped from the NEC ESMPRO Manager. For completion of the network boot, see "2.2.2.4 How to confirm the status of the network-boot procedure by NEC ESMPRO Manager PXE Service" in "NEC ESMPRO Manager Ver.5 Setup Guide".
8.4 Managed Servers ♦Setting a Windows Firewall If the Windows Firewall is enabled, communication with the management machine will be interrupted and the system will not work correctly. To use NEC ESMPRO Manager with the Windows Firewall enabled, open the required ports.
♦CUI Remote Console after Windows boot If the managed server does not support SOL, Remote Console of SAC (Special Administration Console) of Windows cannot be executed via LAN. To execute the CUI remote console function of the SAC screen after Windows boot, select [Server]-[Console Redirection] and change [ACPI Redirection] to [Enable] on the BIOS Setup Utility screen of the managed server.
8.5 BMC Configuration ♦BMC Configuration tool Among the BMC configuration information tools there are some tools which cannot be used to setup NEC ESMPRO Manager. NEC MWA Agent cannot be used. If NEC MWA is stored in the EXPRESSBUILDER DVD-ROM, [A setup of a system management] stored in the same EXPRESSBUILDER DVD-ROM cannot be used. The Console-less function of the EXPRESSBUILDER can not be used when NEC MWA is stored in the same EXPRESSBUILDER DVD-ROM.
- If remote console feature of EXPRESSBUILDER does not support the setting of the function, the tool always set "disable" for the function when it registers the BMC configuration. - If NEC ESMPRO Manager does not support the setting of the function, the NEC ESMPRO Manager cannot set disable for the function nor change IP address when DianaScope Agent support the setting of the function and the function has been set enable. 2.
8.6 Web client ♦Operation from two or more browsers NEC ESMPRO Manager cannot be operated using two or more browser windows by one Web client. When you use the browser which has tabbed browsing, the NEC ESMPRO Manager cannot be operated using two or more tab. ♦Downloading Configuration Information File When you try to download the file from [Configuration Information File] of [Linkage Service] on NEC ESMPRO Manager, Internet Explorer may block the download.
♦Note on using Internet Explorer since version 7 If you login to NEC ESMPRO Manager Ver.5 from Web client using Internet Explorer for a long time, according to Internet Explorer restriction (for detail, see Microsoft Knowledge Base 830555), memory usage of Internet Explorer on Web client will increase. (About 10MB a day at maximum.) So, do following processes if you use it for a long time after login from Web client. - Logout Web client regularly.
8.7 Applications run on the Management PC ♦NEC ESMPRO User Group To use applications run on the management PC, let the user belong as a member of the NEC ESMPRO User Group (by default, Administrators). ♦Coexistence of NEC ESMPRO Manager with other vendor's SNMP management application When another vendor's SNMP management application which receives an SNMP trap is used along with NEC ESMPRO Manager, one of them may fail to receive the SNMP trap due to a conflict between the two applications.
♦Monitoring Ver. 3.2 or prior version of NEC ESMPRO Agent and DMI Agents A function for monitoring Ver. 3.2 or prior version of NEC ESMPRO Agent and DMI Agents has been removed from the NEC ESMPRO Manager Ver. 4.3 or later. As a result, the Manager behaves as follows. By performing auto-discovery, server icons are registered on the Operation Window. SNMP traps and DMI events sent from monitored servers are displayed on the AlertViewer properly.
♦Transmitting and receiving packets between NEC ESMPRO Manager and NEC ESMPRO Agent Packets will be transmitted/received between NEC ESMPRO Manager and the Agent at the following times. We recommend reasonable care in operating in a system which charges you for things such as connection on a WAN. In addition, note that a large amount of data is flown in server management by DMI (Set "On" for DMI Agent displayed on a server icon on the Operation Window).
♦Settings on standalone environments without network connections When you install the NEC ESMPRO Manager and the NEC ESMPRO Agent on a machine together, if the machine is not connected to the network, take the following steps to monitor the machine itself: Specify 127.0.0.1 for Start Address and End Address as a range for the Auto-discovering. Specify 127.0.0.1 for the SNMP trap destination. If you have already registered server icons, execute AutoDiscover after deleting the icons.
[Work Around] If you have changed each item on “Receive from Agent (TCP/IP)” as user without Administrators privilege, take the following procedure: - Logon as a user with Administrators privilege. - If you have changed each item from Receive valid (green) to Receive invalid (red), restore it to "Receive valid (green)", and change it to "Receive invalid (red)" again.
[Problem] If a monitored server has multiple IP addresses for a single network card, the IP address of the SNMP Response packet from NEC ESMPRO Agent may differ from the destination address in the IP header of the SNMP Request packet from NEC ESMPRO Manager.
♦Display of the network status on the DataViewer When you monitor a server with Windows Vista installed, the message "Dormant" appears for Status on the Network General window of the DataViewer even if the network properly works. In such a case, check the network status on the monitored server.
Appendix Port numbers / Protocols NEC ESMPRO Manager uses the following port numbers and protocols. In case of two-way protocol, upper arrow shows that connection starts, and lower arrow shows that connection turns. In case of port No. unknown, unused port is used to start connection. [Web Client <->Management PC] Web Client Management PC Protocol Function Component Management/ monitoring Web Browser Port No. /Direction Port No.
Remote Console (CUI, non-SOL) NEC ESMPRO Manager 47115 UDP -> <- BMC configuration with network booting NEC ESMPRO Manager PXE Service 67 67 or 4011 69 UDP -> <- Remote Wake Up NEC ESMPRO Manager Unknown Information Collection (through NEC ESMPRO Agent Extension) NEC ESMPRO Manager Unknown Scheduled Running NEC ESMPRO Manager Unknown Search of NEC ExpressUpdate Agent, Universal RAID Utility NEC ESMPRO Manager Unknown NEC ExpressUpdate, Universal RAID Utility NEC ESMPRO Manager Unknown
[Management PC -> EM Card] Management PC Function Component Port No.
[Applications run on the Management PC] Function Component Port No. Inter-Manager Communication ESM Base Service Unknown Alert Viewer Alert Viewer Unknown Protocol Port Component /Direction No. TCP -> 8806 ESM Base Service 8807(*1) ESM Alert Service <- *1 You can change the port number from [Tools] - [Port Settings] of AlertViewer. Adding a Firewall exception is not needed.
Services [NEC ESMPRO Manager] NEC ESMPRO Manager uses the following services. Service Name Process Name Alert Manager Main Service AMVMain.exe Alert Manager Socket(R) Service amvsckr.exe Dmi Event Watcher dmieventwatcher.exe ESM Alert Service esmasvnt.exe NVBASE System Service nvbase.exe ESM Command Service nvcmd.exe ESM Remote Map Service nvrmapd.
Order of starting or stopping services To start or stop services, perform the following procedure. ♦Starting services 1. Alert Manager Main Service 2. ESM Base Service 3. ESM Remote Map Service 4. ESM Command Service 5. ESM Alert Service 6. Dmi Event Watcher(*) 7. ESMPRO/SM Base Service 8. ESMPRO/SM Trap Redirection(*) 9. AlertManager Socket(R) Service(*) 10. ESMPRO/SM Web Container 11. ESMPRO/SM Common Component 12. ESMPRO/SM Event Manager 13.
[PXE Service] The following services is installed when you select "PXE Service" on the installation. Service Name Process Name Function ESMPRO/SM PXE Agent Service PxeAgent.exe Command execution from the main service ESMPRO/SM PXE TFTP Service RMVtfldr.exe A file transfer to the managed server ESMPRO/SM PXE BINL Service RMVBINLS.exe The boot of the managed server ESMPRO/SM PXE Main Service RMVAUTH.exe PXE Service main service Procedures to start or stop services.
BMC settings You can change the BMC Configuration Information from [BMC Setting] of the NEC ESMPRO Manager. For details of [BMC Setting], see the online help of the NECESMPRO Manager. The default BMC values set by selecting [Default Value] in NEC ESMPRO Manager and by executing "BMC I nitialization" are shown below. *Pink cells are differences.
Miscellaneous 78 Alert Level Error, Warning Separate Setting Alert Retry Count 3 0 Alert Timeout Behavior when SEL repo sitory is full Platform Event Filtering 6 0 Stop logging SEL No change Enable Disable
