User's Guide

Table 4-5 Specific commands of '/grps/grpset/<Group Name>/expup'
Command Description
load Updates all modules of components belonging to the specified group to the latest
version.
Refer to section 4.2.1.3 for more information.
stop Cancels all update command to <Group Name>.
Refer to section 4.2.4.2 for more information.
Example
`show /grps/grpset/<Group Name>/expup` command enables you to view NEC ExpressUpdate information
of the group<Group Name>.
-> show /grps/grpset/root/expup
ufip=/grps/grpset/root/expup
ufit=expup
Targets:
mods
Properties:
RepositoryLocation=LOCAL
ExpUpStatus=NOT_LATEST
UpdatePkgLatestDownloaded=4/1/2011 01:00:00
NextDownloadDate=4/2/2011 01:00:00
Verb s:
cd
exit
help
show
load
stop
4.1.2 Displaying a list of modules
4.1.2.1 Information of components
A list of modules for the specified component is displayed at the below target.
• /cmps/ <Component Name>/map/expup/mods
Property of this target is as follow. There is no specified command for this target.
Table 4-6 Property of '/cmps/ <Component Name>/map/expup/mods'
Property Access Description
EntryCount read Displays a number of modules managed by
NEC ExpressUpdate.
26