Installation Guide

2. Express Report Service
This section explains necessary setup procedure to introduce Express Report Service.
Make sure to read through it before you use Express Report Service.
Registration to Express Report Service allows you to report automatically to Support Center on failure information
(includes preventive maintenance information), and that can be sent via E-mail or modem. This service permits you to
detect system troubles in advance and to maintain the computer promptly in case of trouble.
Additionally, forwarding reports from several servers (NEC ESMPRO Agent) to an NEC ESMPRO Manager, you can
send Express Report via NEC ESMPRO Manager.
2.1 System requirements
Express Report Service requires the following hardware and software:
1) Hardware
- Memory 18.0 MB or more
- Free hard disk drive space 30.0 MB or more
- Modem (via Dial-up)
In regard to support modem, contact Support Center for details.
- Mail Server (via Internet mail)
SMTP is used as a protocol.
2) Software
- NEC ESMPRO Agent in EXPRESSBUILDER DVD, which is packed with the computer.
- NEC ESMPRO Agent-supported OS
2.2 Before starting installation
Express Report Service must be installed after the installation of NEC ESMPRO Agent.
7