Installation Guide

22. Go back to [Destination Setting] window.
Click [OK] on [Destination Setting] window.
When the report method [Express Report Service (HTTPS)] is valid, [Destination Setting] window is deleted.
When the report method [Express Report Service (HTTPS)] is invalid, confirmation window is displayed.
When the current Base setting and Destination ID Setting are both appropriate, click [Yes] (recommended).
If further configuration is necessary, click [No].
If you click [No], after finishing configuration, select [Base Setting]. Display [Report] property, then activate
(change the color to green) the bitmap switches (valid/invalid) of [Express Report Service (HTTPS)] in Report
method list.
23. Click [Schedule] and display [Schedule] window.
Specify ˝Retry setting (Interval, Expiration Time) ˝ and ˝Reporting Time Table ˝.
Default value is set as every 5 minutes. Retry for up to 72 hours after is operative at all hours. Do not modify the
default except for any necessary reason.
When the specification is done, click [OK]
24. Go back to [Alert Manager] Report Setting Tool.
Expand the event log tree on the left side of the window. Right-click an arbitrary event ID, which the destination
of [Express Report Service (HTTPS)] is specified, (e.g. source name: aic78xx, event ID: 5), Menu is displayed.
Execute [Test Report] from Menu and confirm that the report is issued as defined in the definition file.
Now the configuration is finished. Select [File] menu - [Finish] to close [Alert Manager] Report Setting Tool.
37