Installation Guide

7. Click [OK] to return to [Express Report (Dial-up) Setting] window.
8. Click [Test (1st)] to confirm a Test Report.
9. Click [Opening Report] to confirm Opening report.
[Opening report] is operative after finishing a Test report.
Express Report Service is launched after Opening report.
10. Click [OK] to close [Express Report Base setting] window.
11. Go back to [ID Setting] window and click [Schedule...] button to specify ˝Retry setting (Interval,
Expiration Time) ˝ and ˝Reporting Time Table ˝.
Default value is set as every 5 minutes. Retry for up to 72 hours after is operative at all hours.
This value is recommended. Do not modify the default except for any necessary reason.
12. When the specification is done, click [OK] button to close [Schedule...] window.
13. Message box is displayed, asking if the report method should be activated. Click [Yes].
”
If you click [No], select [Base Setting] in Alert Manager. Display [Report] property, then activate (change the color
to green) the bitmap switches (valid/invalid) of [Express Report Service] in Report method list.
Now Express Report (via Dial-up) is operative.
In regard to the setting of Alert Reporting function, refer to ˝Server Agent Help ˝ and ˝Alert Manager Help ˝.
22