Installation Guide

- If [Report Opening CD (or FD)] is used on the device other than contracted one, the following window
is displayed.
* For Report Opening CD, read [Report Opening FD] on the window as [Report Opening CD].
If a proper [Report Opening CD (or FD)] is available, click [Exit] to stop the setup. When a proper
[Report Opening CD (or FD)] become available, execute setup again.
When the server name is changed after contract, click [Continue].
- In case of failure read-in of Report Opening CD (or FD), the following window is displayed.
* For Report Opening CD, read [Report Opening FD] on the window as [Report Opening CD].
This window is displayed due to following reasons.
- The FD drive path in the FD is different.
- Report Opening CD (or FD) is not set properly into the optical drive.
- The content of Report Opening CD (or FD) is wrong.
Eject [Report Opening CD (or FD)] and set it properly. Then specify the correct drive and click
[Continue].
When the same window is still displayed, click [Exit] to stop the setup. Then contact a Sales and
Service office near you for confirmation of [Report Opening CD (or FD)].
This window is also displayed when ˝Express Report Service Opening Key file ˝ is copied into a
drive other than ˝A ˝. Specify the copied drive and click [Continue].
10