Installation Guide

1. Introduction
Before you use the product, read through this document carefully, which gives you the proper usage of the utility.
♦Notations used in the text
In addition to safety-related symbols urging caution, 3 other types of notations are used in this document. These
notations have the following meanings.
Indicates critical items that must be follo
wed when the operating software.
Indicates items that must be confirmed when the operating software.
Indicates information that is helpful to keep in mind when using this server.
♦Setup
The following is needed for the setup of Express Report Service (MG). Prepare beforehand.
- The contract of hardware maintenance service for this computer or Express Report Service.
For details of the contract, contact your dealer.
- When starting Express Report Service (MG).
˝Opening Key File ˝, containing contract information, must be applied to the target server.
˝Opening Key File ˝ is provided by Support Center upon our Opening preparation.
Concerning file presentation and file application, we offer you two methods of delivery as follows:
- Download via network
If you sign up Express Report Service (MG) for NEC Support Pack entry site or Customer entry site, you can
download the ˝Opening Key File ˝ after our preparation is done, following after your application.
- Opening CD (or Opening FD)
If you sign up Express Report Service (MG) with an application form or a contract document enclosed with the
product, we first look at your application. When our preparation of Opening is done, ˝Opening CD (or Opening
FD) ˝ with ˝Opening Key File ˝ is sent from Support Center.
Wait for a while after it follows a procedure for application.
6