Installation Guide

2.7 Definition file
When selected ˝HTTPS ˝ as a report method, this procedure must be followed.
♦In case of trouble; Log-gathering/Log report function
Concerning log information reported in conjunction with failure information, specify it in accordance with the following
conditions.
<Path:%ESMPRO%¥AlertMan¥Work¥WMGReprt>
<File name:MGHTPLOG>
[Configuration]
- TimeOut=xxxx *Specifies a time out period (sec).
- MaxSize=0 *Specifies an attachable maximal log size (KB).
When ˝0 ˝ is given, unlimitedly possible.
[DefaultTools]
- Command=”c:¥xxx¥xxx¥xxx.bat” *Used for events in which a command is undefined.
- LogFile=”:¥xxx¥xx¥xxx.log” *Log file name or folder.
- Directory=”c:¥xxx¥xxx” *Directory where the command is executed.
- IPadr=YES or NO *IP address argument entry for the server in which failure occurred.
[NoneTrouble] *Specifies sources of exempt command execution/event ID.
- SourceName01=xxxxxxx
- EventID01=xxxxx,xxxxxx,xxxxx
- SourceName02=xxxxxxx
- EventID02=xxxxx,xxxxxx,xxxxx
[Tool001] *Specifies sources of exempt command execution/event ID.
- SourceName01=xxxxxxx *Command is registerable from ˝Tool001～Tool999 ˝.
- EventID01=xxxxx,xxxxxx,xxxxx
- Command=”c:¥xxx¥xxx¥xxx.bat”
- LogFile=”c:¥xxx¥xxx¥xxx.log
- Directory=”c:¥xxx¥xxx”
- IPadr=YES or NO
[Tool002]
- SourceName01=xxxxxxx
- EventID01=xxxxx,xxxxxx,xxxxx
- Command=”c:¥xxx¥xxx¥xxx.bat”
- LogFile=”c:¥xxx¥xxx¥xxx.log
- Directory=”c:¥xxx¥xxx”
- IPadr=YES or NO
24