User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
7
Chapter1 About Command Line Interface
The NEC ESMPRO Manager command line interface provides a set of commands that can control managed
components through the command line from the management PC.
The set of commands covers a part of functions that can be executed by using the web browser.
CHECK:
 The set of commands mainly enables to execute functions by communication with BMC or
NEC ESMPRO Agent Extension on the managed component. It does not support the
functions that require NEC ESMPRO Agent on the managed component.
The following commands are available:
 Group management Commands
Use t
o operate a group due to operate more than one managed components through a single operation.
 Component Manageme
nt Commands
Use to operate a managed component.
 EM Card Management Commands
Use t
o operate an EM card.
 Chassis Management Com
mands
Use to operate a chassis.
 Communication Management Commands
Use t
o change settings for connection to a managed component via modem or directly.
 Environment Setting Commands
Use t
o view and change the settings of NEC ESMPRO Manager.
 User Management Commands
Use t
o manage users who operate NEC ESMPRO Manager on web browser.
 Other Commands
1.1 System Requirements
The NEC ESMPRO Manager command line interface can be executed only on a PC (called a Manager
server) that is installed the NEC ESMPRO Manager.
The NEC ESMPRO Manager command line interface requires following user level of operating system:
On Windows: Administrator
On Linux: root
CHECK:
 In case of Windows Vista, Windows 7 and Windows Server 2008, you need to set the
permission to access to the directory including Command Line Interface execution file
(dscli.exe). After setting the permission to access the directory, the standard user can also
use Command Line Interface.
TIP:
 See “NEC ESMPRO Manager Ver.5 Installation Guide” about the system requirement of
NEC ESMPRO Manager.