User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
33
KeyName Contents Value
SCH_AC_LINK Specify AC-LINK Policy.
(This setting works like as
setPowerRestoreDelay
command.)
* Display only. Cannot be set.
-
SCH_DC_OFF_ENABLE Determine whether to
enable/disable the function that
turns the managed component
off forcibly after shutdown OS.
If the managed component is still
DC-ON state after OS shutdown,
set enable to turn it off when
NEC ESMPRO Agent Extension
shutdowns its OS.
0: Disabled
1: Enabled
SCH_DC_OFF_DELAY Specify delay time in minutes to
turn the managed component off
after shutdown OS.
This setting is effective only when
SCH_DC_OFF_ENABLE is
enabled.
5-60
SCH_SHUTDOWN_ENABLE Determine whether to
enable/disable the function which
shutdowns OS when the
managed component is turned on
during the down period specified
through “scheduled running”.
0: Disabled
1: Enabled
SCH_SHUTDOWN_WAIT Specify delay time in seconds to
shutdown the managed
component after shutdown OS
command is issued.
* Display only. Cannot be set.
-