Installation Guide

5. In the Service Settings dialog box, set the values as follows, and then click [OK].

Description of service : snmp

Name or IP address of the computer hosting

this service on your network : Name or IP address of the computer

External Port number for this service : 161

Select : UDP

6. Close the Network Connections window.

♦Windows Server 2008 Server Core / Windows Server 2008 R2 Server Core

1. Execute the following commands by the command prompt.

"netsh firewall add portopening protocol = UDP port = 161 name = snmp mode = ENABLE scope = ALL"The port

used on SNMP appears.

2. Close the command prompt.