Installation Guide

- If you double-click to select a menu, two same dialog boxes may appear. Click [Exit] to close one of
the dialog boxes.
- If you click the [Cancel] button during setup, the message asking whether to stop or not to stop the
installation will appear. You can stop the installation by clicking on the [Stop] button (the main
menu remains displayed). However, the file having been setup halfway will not be deleted.
- Windows installer may rarely cause error during installation, and the setup program execution may
fail.
5. Click [Next].
The setup program determines the machine type automatically.
If the setup program is unable to determine the machine model, the install of NEC ESMPRO Agent will be
stopped.
6. Enter the path in which NEC ESMPRO Agent is installed and click the [Next] button.
The NEC ESMPRO Agent module is installed below the ESM directory of the root partition in default. If no
problem is found, click the [Next] button without any modification.
To change the installation directory, click the [Reference] button, specify the desired installation directory with
the full path including the drive name, and click the [Next] button.
This version of NEC ESMPRO Agent is not compatible to the JIS 2004 font that is supported by
Windows Vista / Windows Server 2008 or later. Do not use JIS 2004 font when you enter the
destination path name for installation.
7. When the installation end window appears, click the [OK] button.
The installed is complete. The functions of installed NEC ESMPRO Agent will be enabled after the system is
restarted.
15