Installation Guide

♦Another versions of Windows OS
1. Double-click [Add/Remove Programs] in [Control Panel].
2. Click [Add/Remove Windows Components].
3. Click Select [Management and Monitoring Tools] in the Windows component wizard.
4. Click [Details...].
5. Click Check the check box of [Simple Network Management Protocol].
6. Click [OK].
7. Click the [Next] button.
The file copy operation is started.
8. Insert the Windows OS installation media into the opticak disk drivce, and click [OK].
SNMP Service Setting
4.2.4
The settings of the SNMP Service is described below.
♦Setting preparation of SNMP service
The setting change of the SNMP service of the server that executes, the Server Core installation is done from the PC
for Management by way of the network.
At the times other than Server Core installation, the work of Starting property is unnecessary.
according to the following (♦To change the settings of the SNMP Service) steps.
1. Connected preparation is done on the server side.
Execute the following commands by the command prompt on the server side.
"netsh firewall set service FILEANDPRINT enable SUBNET"
"netsh firewall set service REMOTEADMIN enable SUBNET"
2. Install the SNMP service onto the PC for Management.
*After this item you operate it with the PC for Management.
About the method of installing the SNMP service, see "Installing the SNMP Service".
3. The session from the PC for Management to the server is established.
Execute the following commands by the command prompt on the PC for Management side.
"Net use * ¥¥ <ServerName> ¥c$ /u: <UserName> "
ServerName is a name of the server that executes the Server Core installation.
UserName is a name of the Administrative account.
4. Click the"Control Panel", and double click "Administrative Tools" icon.
5. Right-click on the "Computer Management" from the tree on the left pane.
Click the "Connect to another PC…"
6. The computer name of the server that executes the Server Core installation is input to "Select
Computer" box, and click the "OK" button.
It is connected with "Computer Management" of the server that executes the Server Core installation.
11