Maintenance Manual

5. Details of EXPRESSBUILDER

Express5800/R120d-1M, R120d-2M Maintenance Guide

Chapter 2 Convenient Features

5.2

EXPRESSBUILDER is operated by using onscreen menus.

(1) Boot Selection Menu

When EXPRESSBUILDER starts from DVD or Internal Flash Memory, below menu appears.

Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to select it.

Os installation (default) is selected if no key is pressed.

If Os installation is selected, Top menu shown in (2) Top Menu appears after confirmation of Windows PE

software license.

If Tool menu (Normal mode) is selected, Tool Menu shown in (3) Tool Menu appears. The screen appears on

the display. Select this mode normally.

If Tool menu (Redirection mode) is selected, you can operate EXPRESSBUILDER remotely by using BIOS

Console Redirection. In this mode, the menu items and the tools that can be activated are the same as those in

normal mode.

Tips

Be sure to select normal mode when using the remote KVM feature.

Tool menu (Redirection mode)

Tool menu (Normal mode)

Os installation *** default ***

Boot selection