Maintenance Manual

1. System BIOS
Express5800/R120d-1M, R120d-2M Maintenance Guide
79
Chapter 2 Convenient Features
1.2.5
Boot
If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option Parameter Descriptions
Boot Configuration
− −
Quiet Boot
Disabled
[Enabled]
Enable or disable the feature to display logo during
POST. When this option is set to Disabled, the results
of POST execution are displayed instead of the NEC
logo.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (run with
Disabled state automatically)
Bootup Numlock State
On
[Off]
Enable or disable Numlock feature of keyboard.
Setup Prompt Timeout
Number Specify the time until the <F2> is pressed to launch
SETUP.
Boot Option Priorities
− −
Boot Option #1
− These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the
SETUP starts running upon completion of POST.
Boot Option #2
−
Boot Option #3
−
Boot Option #4
−
CD/DVD ROM Drive BBS Priorities
− Specify the boot priority for each BBS (BIOS Boot
Specification).
Floppy Drive BBS Priorities
−
Hard Drive BBS Priorities
−
Network Drive BBS Priorities
−
[ ]: Factory setting