Maintenance Manual

1. System BIOS
Express5800/R120d-1M, R120d-2M Maintenance Guide
74
Chapter 2 Convenient Features
1.2.4
Server
If you move the cursor to Server, the Server menu screen appears. For the menu that has on the left,
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
(1/2)
Option Parameter Descriptions
System Management
− −
Power Control Configuration
− −
Assert NMI on PERR
Disabled
[Enabled]
Enable or disable feature to detect PCI
PERR.
Assert NMI on SERR
Disabled
[Enabled]
Enable or disable feature to detect PCI
SERR.
FRB-2 Policy
[Retry 3 Times]
Disable FRB2 Timer
Always Reset
Specify how the system should operate if
FRB level 2 errors occur.
Boot Monitoring
[Disabled]
5-60 minutes
Enable or disable the boot monitoring feature
and specify the timeout period.
To use this feature, NEC ESMPRO Agent
must be installed on OS. If starting up an OS
on which it is not installed, disable this
feature
Boot Monitoring Policy
[Retry 3 times]
Always Reset
Specify the processing to be done when
time-out was enforced during boot monitoring
and the server was automatically reset.
Retry 3 times: Attempts to boot OS up to
three times.
Always Reset: Retries booting the OS
repeatedly.
This option can be selected only when Boot
Monitoring has been enabled.