Maintenance Manual

1. System BIOS
Express5800/R120d-1M, R120d-2M Maintenance Guide
53
Chapter 2 Convenient Features
For details about the options, see the table below.
Option Parameter Descriptions
BIOS Information − −
BIOS Version
−
The BIOS version is diaplyed (display only).
Build Date
MM/DD/YYYY The BIOS build date is displayed (display
only).
Access Level
[Administrator]
User
The current access level (Administrator or
User) is displayed (display only).
If no password is set, Administrator is
displayed.
Memory Information
−
−
Total Memory
−
The total capacity of installed memory is
displayed (display only).
System Language
[English]
Français
Español
Deutsch
Italiano
Select a disaplay language for SETUP. If you
run SETUP with BIOS Redirection Port
enabled (other than Disabled), English is
automatically selected. At that time, you
cannot change setting of System Language.
If BIOS Redirection Port is set to Disabled,
the language set in this option is used at the
next startup of SETUP, and you can change
the language setting.
System Date
WWW MM/DD/YYYY Set the system date.
System Time
HH:MM:SS Set the system time
[ ]: Factory settings
Tips
Be sure to confirm that the date and time in the BIOS parameters are correctly
configured. In any of the following situations, check the system time before using
the server.
• After transporting the server
• After removing the server from storage
• After the se
rver wakes up from hibernating in an environment out of the
guaranteed operating range (temperature: 10°C to 35°C; humidity: 20% to 80%
Check the system clock monthly. Additionally, if you implement the server in a
system that requires highly accurate time, use of a time server (an NTP server) is
recommended.
If the system time becomes considerably slow or fast over time even though you
regularly adjust it, contact the dealer where you purchased the server or the
maintenance service company for maintenance.