Maintenance Manual

9. Offline Tools
Express5800/R120d-1M, R120d-2M Maintenance Guide
50
Chapter 1 Maintenance
9.3
Console-less
Off-line Tools can be remotely controlled from PC for Management without requiring keyboard or other
consoles to be connected.
9.3.1
How to remotely control
Control from a LAN connected PC for Management using the remote KVM of EXPRESSSCOPE Engine 3.
For details of the remote KVM, refer to "EXPRESSSCOPE Engine 3 User’s Guide" in EXPRESSBUILDER.
Note
Connect the LAN cable to the connector on management LAN port. Or, if Shared
BMC LAN feature is used, connect the LAN cable to the corresponding LAN
connector.