Maintenance Manual

1. POST Error Message
Express5800/R120d-1M, R120d-2M Maintenance Guide
105
Chapter 3 Appendix
Error Message
Cause
Solution
AE90 CPU2_DIMM4 with error is
enabled.
An error in CPU2_DIMM4 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
Contact your sales representative.
AE91 CPU2_DIMM5 with error is
enabled.
An error in CPU2_DIMM5 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE92 CPU2_DIMM6 with error is
enabled.
An error in CPU2_DIMM6 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE93 CPU2_DIMM7 with error is
enabled.
An error in CPU2_DIMM7 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE94 CPU2_DIMM8 with error is
enabled.
An error in CPU2_DIMM8 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE95 CPU2_DIMM9 with error is
enabled.
An error in CPU2_DIMM9 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE96 CPU2_DIMM10 with error is
enabled.
An error in CPU2_DIMM10 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE97 CPU2_DIMM11 with error is
enabled.
An error in CPU2_DIMM11 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE98 CPU2_DIMM12 with error is
enabled.
An error in CPU2_DIMM12 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
B000 Expansion ROM not
initialized
Failed to expand option ROM. Disable expansion of option ROM of the board
that is not used for OS boot.
B001 Expansion ROM not
initialized - PCI Slot 1B
Option ROM expansion in PCI
slot 1B failed.
Disable expansion of option ROM of the option
board that is not used for OS boot.
Run SETUP, and select Advanced → PCI
Configuration → PCI Device Controller and
Option ROM Settings → PCIxx Slot Option
ROM → Disabled. (xx: PCI slot number)
B002 Expansion ROM not
initialized - PCI Slot 2B
Option ROM expansion in PCI
slot 2B failed.
B003 Expansion ROM not
initialized - PCI
Slot 1C
Option ROM expansion in PCI
slot 1C failed.
B004 Expansion ROM not
initialized - PCI
Slot 2C
Option ROM expansion in PCI
slot 2C failed.
B005 Expansion ROM not
initialized - PCI
Slot 3C
Option ROM expansion in PCI
slot 3C failed.
B006 Expansion ROM not
initialized - PCI
Slot 1D
Option ROM expansion in PCI
slot 1D failed.
B01A Expansion ROM not
initialized - PCI
Slot 1A
Option ROM expansion in PCI
slot 1A failed.
B022 Serial Port Configuration
Overlapped.
Overlapping serial port
configuration was detected.
Start SETUP, select Advanced → Serial Port
Configuration, and specify the setting again in a
way that the values of Base I/O or Interrupt in
Serial Port A and Serial Port B will not be the
same.