User Guide

BMC Configuration User's Guide
56
Item Description Default Value
Host Name Set the Host Name. *5 *6 Blank
Domain Name Set the Domain Name. *6 Blank
Access Limitation Access Limitation setting
Access
Limitation Type
Select the Access Limitation Type.
Allow All
: Access to BMC is not limited.
Allow Address
: Set the IP Address that is allowed to access BMC.
Deny Address
: Set the IP Address that is limited to access BMC.
Allow All
IP Address Set the IP Address to allow or deny to access with BMC. *7 *8 Blank
*1: It is not possible to change for ft Server.
*2: When the Subnet Mask is wrong setting, error message, such as "Failed to apply configuration.", is
displayed.
*3: It is possible to set when DHCP is "Disable".
*4: It is possible to set when DHCP is "Enable".
*5: The length of Host Name must be less than 64 characters. Host Name will be truncated to 63 characters,
if you input over 63 characters.
*6: Host Name and Domain Name should be within total of 255 characters.
*7: The range of IP address to "Allow" or "Deny" access is delimited by ",(Comma)". With regard to the
setting of “Deny” access, "*(Asterisk)" can be described as a wild-card. (ex:
192.168.1.*,192.168.2.1,192.168.2.254)
*8: It is possible to set when Access Limitation Type is "Allowed Address" or "Denied Address". The length
must be less than 255 characters.