User's Guide

1. Installing Internal Optional Devices
Express5800/R110d-1E, E110d-1 User’s Guide
87
Chapter 2 Preparations
1.13.1
Installation
Install a Hard Disk Drive by using the following procedure. Follow the same installation procedure for other
slots.
Important
In the RAID System, build a Disk Array using Hard Disk Drives that have the
same specifications (capacity, rotational speed, and standard).
Tips
Hard Disk Drives can be installed or removed simply by removing the front bezel.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the slot where you install the Hard Disk Drive.
The server provides four slots. Install Hard Disk Drives in ascending port number order. The port
numbers are determined by the slot positions. For details, refer to Chapter 2 (1.13 3.5-inch Hard Disk
Drive).
3. Remove the dummy trays.
Dummy trays are installed in all slots.
Important
• Keep the dummy trays for future use.
• Dummy trays are intended to increase the cooling effect inside the server.
Keep the dummy trays installed in slots where Hard Disk Drives are not
installed.
4. Unlock the handle of the drive carrier.