User's Guide

1. Installing Internal Optional Devices

Express5800/R110d-1E, E110d-1 User’s Guide

Chapter 2 Preparations

SWRAID 設定ジャンパ

Motherboard

321

3 2 1

Disabled Enabled

Backplane for 3.5-inch Hard Disk Drive (J3)

Backplane for 2.5-inch Hard Disk Drive (J3)

After that, configure RAID System using LSI Software RAID Configuration utility.

For details, refer to Chapter 2 (4. RAID System Configuration) in "Maintenance Guide".

Tips

If you setup using the attached EXPRESS BUILDER DVD, RAID System can be

automatically created. Or, you intend to install Windows OS, OS also can be

installed automatically and seamlessly.

(b) If an optional RAID Controller (N8103-128/129/130/134) is used

If using internal Hard Disk Drives in RAID System with an optional RAID Controller (N8103-128/129/130/134)

installed in the server, the SATA cable needs to be rewired.

• For 3.5-inch models: K410-240(00)

• For 2.5-inch models with up to 4 Hard Disk Drives: K410-240(00)

• For 2.5-inch models with 5 Hard Disk Drives or more: K410-240(00) and K410-204(00)

The SATA cable is connected to the SATA connector on the motherboard in the factory settings.

Onboard SAT

controller

Onboard SAT

controller